NEWS

At present, the outer shell of the closed cooling tower generally uses galvanized plate, aluminum-zinc plating sheets, magnesium-aluminum-zinc plating sheet and stainless steel plate. As a new kind of plate, magnesium-aluminum-zinc plating sheet is more and more popular among closed cooling tower manufacturers for its high anticorrosion, self-healing and low cost. Jiangsu Huatal cooling technology co., Ltd took the lead in introducing magnesium-aluminum-zinc alloy coated plate into the closed cooling tower industry after summarizing the previous experience of galvanized and aluminum-zinc plate anti-corrosion performance and high cost of stainless steel plate.

Closed cooling tower, also known as closed circuit cooling tower or closed loop cooling tower, plays an increasingly important role in industrial water cooling system. Today, we would like to share with you how closed cooling tower can help the crankshaft forging line recycle the waste heat from the circulating water, and verify that closed cooling tower is environmentally friendly, energy-saving and green.

The cold winter of photovoltaic industry came suddenly, but also very long. The former photovoltaic industry has led to the rapid growth of numerous related industries, and the closed cooling tower industry is one of the beneficiaries. There are too many key words to talk about in the photovoltaic industry, such as the world's largest installed capacity, anti-dumping investigation, the photovoltaic subsidies, li hejun and so on.

Closed cooling tower, also known as closed circuit cooling tower or closed loop cooling tower, plays an increasingly important role in industrial cooling part. Today, when the environment is very important, noise pollution or environmental pollution is unforgivable. In particular, noise pollution was not regarded as an indicator of environmental pollution before, but with the rise of people's living habits, noise has become a hateful pollution. Therefore, closed cooling tower manufacturers are paying more and more attention to noise reduction of cooling tower.

Domestic pressurized water reactor nuclear power plants generally have three circuits. The coolant in the primary circuit carries the heat generated by the reactor core to the second circuit through the steam generator.The water in the second circuit changes into steam under the heating action of the steam generator, and the steam drives the steam turbine to do work and generate electricity. The steam passing through the steam turbine changes into a mixture of steam/water, and then changes into water after cooling in the third circuit.Under the action of the pump back to the steam generator heating repeat cycle. Traditional nuclear power plant water is cold. If it is near a river or ocean, it can be cycled in a single way and directly eliminated after entering the condenser. The temperature rise of only a few degrees is not harmful to the environment. However, due to the water quality problems will lead to scale and corrosion and other hazards, so in the future, the closed circulating water system will be mor

With the accelerated development of the Internet and big data industry, China's data center industry has also entered the stage of large-scale planning and construction. According to Technavio, China's data market will grow at a compound annual rate of 13% over the next five years, which is higher than the average growth rate of the global data center market, and driven by government investment. In recent years, the development of the Internet and the information construction of the main industries of the national economy are becoming increasingly mature, and the number of data centers is increasing. The number of normal data centers increased from 510,000 to over 1,000,000, especially thelarge data centers has increased from 164 in 2010 to more than 300 now. Closed cooling tower for large data centers has become a trend. Today, we Huatal will take you to understand the development status of data centers and the demand for closed cycle cooling.

2019 National Day Holiday

With the growth of industry and city, the yield of waste sludge as a byproduct of sewage treatment has increased sharply. Huge waste sludge treatment has become an urgent problem to be solved. Heat pump low temperature drying technology used more and more popular, with the deepening of the energy conservation and emissions reduction, how to deal with drying condensate with minimal energy consumption, We Huatal would like to share some knowledge about the closed cooling tower application of waste sludge low temperature drying, by comparison with energy consumption make the closed cooling tower in the low-temperature drying technology become inevitable.

Spiral-plate heat exchanger is widely used in the coal chemical industry. The long-term use of cooling water causes fouling, blockage and other phenomena, which affect the heat transfer efficiency. Therefore, more and more closed cooling towers are introduced into the coal chemical industry. How to operate the spiral plate heat exchanger, how to use the closed cooling tower for cooling, today our Huatal cooling tech will share a case, and hope to inspire you.

The placement of the closed cooling tower is not as strict as the open cooling tower, but it should be noted that the closed cooling tower will be made into a whole together or pry block for transportation and installation after the end of production.