How to use closed cooling tower water pump to save energy -- HuaTal Cooling Tower

The water pump used in the closed cooling tower is the device that provides pressure for the whole cooling system, so the water pump must be used in accordance with the regulations. Excessive load will cause insufficient pump pressure supply fault. The work efficiency of closed cooling tower will be affected if the water pump cannot complete the work requirement. So we put together eight Suggestions to scientifically use the pump.

1. Design the length of the pipeline system reasonably and shorten the pipeline as much as possible. The longer the pipeline is, the greater pressure lost will be;

2. Take the motor as the first choice, avoid using diesel engine or gasoline engine as far as possible, and three-phase asynchronous motor is better than single-phase asynchronous electric motor, if the condition allows,  please consider the variable frequency motor;

3. If the water quality of the water circulation system can be controlled very well, you can consider to remove the filter, reduce the resistance of water circulation, will get a better circulation effect;

4. Try not to use the upgushing type of water pipe, this kind of pipes will increase the pressure of the pump, increase the power consumption of the pump, excessive use of the pump will cause performance degradation, insufficient pressure, insufficient water supply;

5. Clean up the water pipe regularly, because the impurities in the water pipe will improve the resistance of the water flow, and impurities will be gathered in the impeller or the guide shell, cause resistance increased and water flow reduced;

6. The shaft linkage is more efficient than the belt;

7. Periodically replace the seal plug of the pump, seal plug aging will cause air to enter the pump, resulting in the supply pressure drop;

8. The outlet water pipe diameter should be bigger than the connection pipe diameter, as the comparison with the pipe diameter;

The above Suggestions are good use specifications for the water pump, the water pump is not vulnerable parts, so to protect the water pump, to ensure the working efficiency of the closed cooling tower.

Huatal cooling tower focused on the R&D, manufacturing and service of industrial closed cooling tower system, including medium cooling, air cooling and hybrid joint cooling systems. With high-quality products and professional services, Huatal has made the cooling system more energy saving, efficient, reliable, durable and convenient, continuously creating the greatest value for customers.